Waterproof Your Home Step By Step

The surface will be sealed by applying a uniform layer of undiluted acrylic sealant, left to dry for 2 to 4 hours depending on the ambient conditions.

The roof of your house could be damaged considerably during the rainy season if you do not have proper maintenance. Waterproof exposed to inclement weather surface may seem dispensable; however it is an investment staple in the quality of your home.

With the arrival of summer rains are soon to become apparent and you better find you ready. If you have more than four years since I’ve given waterproofing or maintenance to your roof, it is important to take into account the following recommendations that Home Depot experts shared with us:

Read: Living in a Big City on A Budget

1. Clean the area with a broom which will perform the waterproofing; recalls that should be free of dust, oil, grease, rust, moisture, mold and other contaminants affecting adherence.

2. Stir with a spatula any material that cannot be removed with the broom, and the new material will adhere properly.

3 If the above waterproofed presents false adhesions or extensive damage, the waterproofing must withdraw completely spoiled.

4. Seals cracks and fissures with plastic cement, paying particular attention to the critical points: chamfers, cracks, domes, freely water tanks, drains, telephone facilities or satellite dishes.

5. Verify that the surface has a minimum of two percent slope for drains and there are no stagnant zones.

6. Before applying the sealer check all wiring is above the surface.

7. The surface will be sealed by applying a uniform layer of acrylic undiluted sealant, left to dry for 2 to 4 hours depending on the ambient conditions.

8. When dry, place the reinforcement in the points critical generously applying a layer of waterproofing.

9. Standing reinforcing fabric and brush will apply a second coat to avoid bubbles or wrinkles.

10. already dried the critical points reinforcements, the first layer of waterproofing is applied with a brush ixtle without exerting too much pressure on the brush down, in order to spread the fibers evenly on the surface.

Waterproof Your Home Step By Step